1. Repositorio Institucional Universidad de Cuenca
2. Investigación
3. Artículos Publicados por los Docentes
4. Artículos

Título :	Characterization of used lubricant oil in a Latin-American medium-size city and analysis of options for its regeneration
Autor:	Sanchez Alvarracin, Carlos Mauricio Criollo Bravo, Jessica Ximena Albuja Arias, Daniela Alexandra Garcia Avila, Fausto Fernando Pelaez Samaniego, Manuel Raul
Correspondencia:	Sanchez Alvarracin, Carlos Mauricio, carlos.sancheza@ucuenca.edu.ec
Palabras clave :	Waste lubricating oil Characterization Used oil management Circular economy
Área de conocimiento FRASCATI amplio:	1. Ciencias Naturales y Exactas
Área de conocimiento FRASCATI detallado:	1.5.8 Ciencias del Medioambiente
Área de conocimiento FRASCATI específico:	1.5 Ciencias de la Tierra y el Ambiente
Área de conocimiento UNESCO amplio:	05 - Ciencias Físicas, Ciencias Naturales, Matemáticas y Estadísticas
ÁArea de conocimiento UNESCO detallado:	0521 - Ciencias Ambientales
Área de conocimiento UNESCO específico:	052 - Medio Ambiente
Fecha de publicación :	2021
Volumen:	Volumen 6, número 1
Fuente:	Recycling
metadata.dc.identifier.doi:	10.3390/recycling6010010
Tipo:	ARTÍCULO
Resumen :	Petroleum-derived products, such as lubricant oils, are non-renewable resources that, after use, must be collected and processed properly to avoid negative environmental impacts. A circular economy of used oils requires the re-refining and reuse of the same. Similar to most countries in Latin America, the management of used oils in Ecuador is still incipient and few cities collect and treat this material properly. In Cuenca, the ETAPA company collects ~1344 t/year of used oils, which are subjected to pretreatment operations prior to their use as fuel in a cement factory. However, combustion generates polluting gases and disallows the adding of value to the used oils. The lack of studies on the characterization and methods utilized for recovering used oils under the conditions found in medium-size Latin-American cities (e.g., Cuenca), alongside a lack of government policies, have hindered the adoption of re-refining operations. The objective of this work is to characterize the used lubricant oils in Cuenca, to compare them with the properties of used oils from other countries, and to suggest some re-refining technologies for oils with similar properties. Used oil samples were collected from mechanic shops and car-lubricating shops for characterization. Its physicochemical properties and metal contents are comparable to the used oils in other countries globally. Specifically, the flash point, kinematic viscosity, TBN, and concentrations of Zn, Cd, and Mg are similar to the properties of used oils in Iraq, Egypt, and the United Arab Emirates. Based on these results, the best re-refining option for used oils in Cuenca is extraction with solvents in which sedimentation and dehydration (already conducted in Cuenca) is followed by a solvent reaction process, a vacuum distillation process, a finishing process with bentonite, and a final filtration step.
URI :	ttps://www.scopus.com/record/display.uri?eid=2-s2.0-85101545769&origin=resultslist&sort=plf-f&src=s&sid=28e465e79d069905974946564234bb26&sot=b&sdt=b&s=TITLE-ABS-KEY%28Characterization+of+Used+Lubricant+Oil+in+a+Latin-American+Medium-Size+City+and+Analysis+of+Options+for+Its+Regeneration%29&sl=135&sessionSearchId=28e465e79d069905974946564234bb26
URI Fuente:	https://www.mdpi.com/2313-4321/6/1
ISSN :	2313-4321
Aparece en las colecciones:	Artículos

Este ítem está protegido por copyright original

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.